Cost of Consumer Unit (Fuse Box) Replacement in Stockton-on-Tees (2026)
Stockton-on-Tees quotes for consumer unit (fuse box) replacement are landing between £395 and £790 per unit at the moment. Most jobs take 4–8 hours. The three things that move the price most around County Durham are number of circuits; whether spd (surge protection) is added; type a rcbos for ev/solar compatibility.
About consumer unit (fuse box) replacement in Stockton-on-Tees
Stockton-on-Tees is a large city of around 197,000 in County Durham. The housing is mostly red-brick Victorian terraces, stone-built millworker housing and post-war semi-detached estates typical of Northern industrial towns. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like TS16, TS17, TS18 tend to be quicker jobs with standardised fittings. Local trade prices sit below the UK average. Lower contractor overheads and shorter distances across County Durham do most of the work.
Straight up, the North East is usually the cheapest region for trade work. Gas Safe engineers and electricians often quote 10 to 15 percent under the UK average. Newcastle, Durham and Middlesbrough are well served; rural Northumberland jobs tend to go to a regional firm rather than a one-van outfit.
Anything notifiable (new circuits, consumer unit swaps, bathroom zones, EV chargers) falls under Part P and has to go through an NICEIC, NAPIT or ECA registered electrician. Day rates run £200 in the regions up to about £400 in London. If your sparky can't give you a Building Control certificate at the end of a rewire or CU change, walk away.
Consumer Unit (Fuse Box) Replacement cost breakdown in Stockton-on-Tees
Standard 10-way dual-RCD board in a flat
16-way board with RCBOs and SPD in a 3-bed
Large board with multiple circuits, remedial work, meter tails upgrade
What affects the price of consumer unit (fuse box) replacement in Stockton-on-Tees?
- Number of circuits
- Whether SPD (surge protection) is added
- Type A RCBOs for EV/solar compatibility
- Metal vs dual-RCD board
- Remedial work to bring circuits up to 18th Edition
Stockton-on-Tees vs the UK average
Stockton-on-Tees sits in the electrical market at a cost multiplier of 0.88× the UK national average. That puts Stockton-on-Tees consumer unit (fuse box) replacement prices at £395–£790 versus the UK average of £450–£900 per unit.
Consumer Unit (Fuse Box) Replacement cost calculator — Stockton-on-Tees
Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.
Get 3 free quotes from local consumer unit (fuse box) replacement specialists in Stockton-on-Tees
Compare prices from vetted, trade-body-certified professionals near Stockton-on-Tees (TS16, TS17, TS18). No obligation, takes about 2 minutes.
Get my free quotes- No obligation
- Takes 2 minutes
- Vetted tradespeople
- Insurance-backed
What's typically included in a consumer unit (fuse box) replacement quote
- Supply of new 18th Edition compliant board
- Earth bonding check
- Electrical Installation Certificate (EIC)
- Building Regulations Part P notification
- Individual circuit testing
Frequently asked questions
How much does consumer unit (fuse box) replacement cost in Stockton-on-Tees?
Budget £395 to £790 per unit for consumer unit (fuse box) replacement in Stockton-on-Tees. Prices here are around 12% cheaper than the UK average. What moves a quote inside that range is mostly electrical contractor day rates in County Durham and the specific material list for your job.
How long does consumer unit (fuse box) replacement take in Stockton-on-Tees?
A straightforward consumer unit (fuse box) replacement job in Stockton-on-Tees runs to 4–8 hours. You can lose days to things outside the contractor's control — parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.
What's included in the price of consumer unit (fuse box) replacement in Stockton-on-Tees?
A proper consumer unit (fuse box) replacement quote in Stockton-on-Tees should cover: Supply of new 18th Edition compliant board; Earth bonding check; Electrical Installation Certificate (EIC); Building Regulations Part P notification; Individual circuit testing. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.
Is consumer unit (fuse box) replacement cheaper in Stockton-on-Tees than the UK average?
Consumer Unit (Fuse Box) Replacement in Stockton-on-Tees runs around 12% cheaper than the UK average. The UK-wide benchmark for this job is £450 to £900 per unit; Stockton-on-Tees quotes tend to land between £395 and £790. Handy to know what the average actually looks like before you price round.
Do I need planning permission for consumer unit (fuse box) replacement in Stockton-on-Tees?
Most consumer unit (fuse box) replacement jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring County Durham Council before you book anything in. It's a free call and saves a world of grief later.
See all consumer unit (fuse box) replacement prices across the UK or browse all tradespeople costs in Stockton-on-Tees.