Electrical · Staffordshire

Cost of Consumer Unit (Fuse Box) Replacement in Stoke-on-Trent (2026)

If you're looking at consumer unit (fuse box) replacement in Stoke-on-Trent right now, you should be seeing quotes in the £395 to £790 range per unit. That's based on current Staffordshire contractor rates and the wider UK market. Anything well outside those numbers is worth questioning before you sign.

Typical cost in Stoke-on-Trent -12%
Low £395
Typical £593
High £790
Typical price per unit Last updated 16 June 2026
  • NICEIC Part P certified
  • NAPIT Building Regs notifications
  • TrustMark Government-endorsed
  • Part P 18th Edition compliant

Consumer Unit (Fuse Box) Replacement in Stoke-on-Trent: below the UK average

Stoke-on-Trent is a large city of around 258,000 in Staffordshire. The housing is mostly a mix of Victorian terraces, inter-war semi-detached housing and modern new-build estates. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like ST1, ST2, ST3 tend to be quicker jobs with standardised fittings. Local trade prices sit below the UK average. Lower contractor overheads and shorter distances across Staffordshire do most of the work.

For consumer unit (fuse box) replacement, Stoke-on-Trent runs around 12% below the UK average, with quotes landing £395 to £790 per unit and a deep local contractor pool to draw on. The West Midlands is close to the UK average on pricing, and the contractor pool is deep. Birmingham commands a modest premium over Black Country towns. You can usually get a Gas Safe engineer or a sparky booked within a week or two, which helps in an emergency.

Expect £395 to £790 per unit for consumer unit (fuse box) replacement in Stoke-on-Trent, over roughly 4-8 hours, given the local rate runs around 12% below the UK average. Anything notifiable (new circuits, consumer unit swaps, bathroom zones, EV chargers) falls under Part P and has to go through an NICEIC, NAPIT or ECA registered electrician. Day rates run £200 in the regions up to about £400 in London. If your sparky can't give you a Building Control certificate at the end of a rewire or CU change, walk away.

Consumer Unit (Fuse Box) Replacement price tiers in Stoke-on-Trent (£395 to £790)

Basic £395 - £530

Standard 10-way dual-RCD board in a flat

Standard £530 - £705

16-way board with RCBOs and SPD in a 3-bed

Complex £705 - £1,145

Large board with multiple circuits, remedial work, meter tails upgrade

What affects the price of consumer unit (fuse box) replacement in Stoke-on-Trent?

  • Number of circuits
  • Whether SPD (surge protection) is added
  • Type A RCBOs for EV/solar compatibility
  • Metal vs dual-RCD board
  • Remedial work to bring circuits up to 18th Edition

Stoke-on-Trent runs 12% under the UK average for consumer unit (fuse box) replacement

Stoke-on-Trent sits in the electrical market at a cost multiplier of 0.88× the UK national average. That puts Stoke-on-Trent consumer unit (fuse box) replacement prices at £395-£790 versus the UK average of £450-£900 per unit.

Stoke-on-Trent vs UK national average, per unit Stoke-on-Trent £395 £790 UK average £450 £900
Typical price range, per unit

Consumer Unit (Fuse Box) Replacement cost calculator: Stoke-on-Trent

Estimated cost in Stoke-on-Trent
£555 - £740
per unit

Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.

Get 3 free quotes from local consumer unit (fuse box) replacement specialists in Stoke-on-Trent

Compare prices from vetted, trade-body-certified professionals near Stoke-on-Trent (ST1, ST2, ST3). No obligation, takes about 2 minutes.

Get my free quotes
  • No obligation
  • Takes 2 minutes
  • Vetted tradespeople
  • Insurance-backed

What's typically included in a consumer unit (fuse box) replacement quote

  • Supply of new 18th Edition compliant board
  • Earth bonding check
  • Electrical Installation Certificate (EIC)
  • Building Regulations Part P notification
  • Individual circuit testing

Frequently asked questions

How much does consumer unit (fuse box) replacement cost in Stoke-on-Trent?

Budget £395 to £790 per unit for consumer unit (fuse box) replacement in Stoke-on-Trent. Prices here are around 12% cheaper than the UK average. What moves a quote inside that range is mostly electrical contractor day rates in Staffordshire and the specific material list for your job.

How long does consumer unit (fuse box) replacement take in Stoke-on-Trent?

A straightforward consumer unit (fuse box) replacement job in Stoke-on-Trent runs to 4-8 hours. You can lose days to things outside the contractor's control: parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.

What's included in the price of consumer unit (fuse box) replacement in Stoke-on-Trent?

A proper consumer unit (fuse box) replacement quote in Stoke-on-Trent should cover: Supply of new 18th Edition compliant board; Earth bonding check; Electrical Installation Certificate (EIC); Building Regulations Part P notification; Individual circuit testing. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.

Is consumer unit (fuse box) replacement cheaper in Stoke-on-Trent than the UK average?

Consumer Unit (Fuse Box) Replacement in Stoke-on-Trent runs around 12% cheaper than the UK average. The UK-wide benchmark for this job is £450 to £900 per unit; Stoke-on-Trent quotes tend to land between £395 and £790. Handy to know what the average actually looks like before you price round.

Do I need planning permission for consumer unit (fuse box) replacement in Stoke-on-Trent?

Most consumer unit (fuse box) replacement jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring Staffordshire Council before you book anything in. It's a free call and saves a world of grief later.

How do I get a fair consumer unit (fuse box) replacement price in Stoke-on-Trent?

Get at least three written, itemised quotes so you can compare like for like, and tell each firm exactly the same brief. A basic consumer unit (fuse box) replacement job in Stoke-on-Trent starts around £395, while a complex one can reach £1,145 per unit. Quotes near the bottom of that range usually mean a more basic spec, not a better deal, so check what's actually included before you choose on price alone.