Electrical · East Yorkshire

Cost of Electrical Installation Condition Report (EICR) in Hull (2026)

A typical electrical installation condition report (eicr) job in Hull costs £105 at the budget end and £245 for a full-spec install, per property. Outside peak season you'll usually get booked in within a week or two; summer runs tighter.

Typical cost in Hull -18%
Low £105
Typical £175
High £245
Typical price per property Last updated 22 April 2026
  • NICEIC Part P certified
  • NAPIT Building Regs notifications
  • TrustMark Government-endorsed
  • Part P 18th Edition compliant

About electrical installation condition report (eicr) in Hull

Hull is a large city of around 267,000 in East Yorkshire. The housing is mostly red-brick Victorian terraces, stone-built millworker housing and post-war semi-detached estates typical of Northern industrial towns. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like HU1, HU2, HU3 tend to be quicker jobs with standardised fittings. Local trade prices sit below the UK average. Lower contractor overheads and shorter distances across East Yorkshire do most of the work.

Yorkshire is one of the better-value regions for trade work thanks to competitive wages and a deep contractor pool. Leeds, Sheffield and York sit close to the UK average; Hull, Grimsby and the former industrial towns run well below it. TrustMark and Buy With Confidence are widely adopted — worth asking for.

Anything notifiable (new circuits, consumer unit swaps, bathroom zones, EV chargers) falls under Part P and has to go through an NICEIC, NAPIT or ECA registered electrician. Day rates run £200 in the regions up to about £400 in London. If your sparky can't give you a Building Control certificate at the end of a rewire or CU change, walk away.

Electrical Installation Condition Report (EICR) cost breakdown in Hull

Basic £105 – £145

1-bed flat, up to 6 circuits

Standard £145 – £190

3-bed house, 10 circuits

Complex £190 – £330

Commercial property or 4+ bed with annexes

What affects the price of electrical installation condition report (eicr) in Hull?

  • Number of circuits tested
  • Landlord vs homeowner report
  • Property size
  • Remedial work quoted separately

Hull vs the UK average

Hull sits in the electrical market at a cost multiplier of 0.82× the UK national average. That puts Hull electrical installation condition report (eicr) prices at £105–£245 versus the UK average of £125–£300 per property.

Hull vs UK national average — per property Hull £105 £245 UK average £125 £300
Typical price range, per property

Electrical Installation Condition Report (EICR) cost calculator — Hull

Estimated cost in Hull
£150 – £200
per property

Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.

Get 3 free quotes from local electrical installation condition report (eicr) specialists in Hull

Compare prices from vetted, trade-body-certified professionals near Hull (HU1, HU2, HU3). No obligation, takes about 2 minutes.

Get my free quotes
  • No obligation
  • Takes 2 minutes
  • Vetted tradespeople
  • Insurance-backed

What's typically included in a electrical installation condition report (eicr) quote

  • Visual and dead testing of each circuit
  • Live testing of RCDs
  • Coded report (C1/C2/C3/FI)
  • Remedial recommendations with timescales

Frequently asked questions

How much does electrical installation condition report (eicr) cost in Hull?

Budget £105 to £245 per property for electrical installation condition report (eicr) in Hull. Prices here are around 18% cheaper than the UK average. What moves a quote inside that range is mostly electrical contractor day rates in East Yorkshire and the specific material list for your job.

How long does electrical installation condition report (eicr) take in Hull?

A straightforward electrical installation condition report (eicr) job in Hull runs to 2–4 hours. You can lose days to things outside the contractor's control — parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.

What's included in the price of electrical installation condition report (eicr) in Hull?

A proper electrical installation condition report (eicr) quote in Hull should cover: Visual and dead testing of each circuit; Live testing of RCDs; Coded report (C1/C2/C3/FI); Remedial recommendations with timescales. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.

Is electrical installation condition report (eicr) cheaper in Hull than the UK average?

Electrical Installation Condition Report (EICR) in Hull runs around 18% cheaper than the UK average. The UK-wide benchmark for this job is £125 to £300 per property; Hull quotes tend to land between £105 and £245. Handy to know what the average actually looks like before you price round.

Do I need planning permission for electrical installation condition report (eicr) in Hull?

Most electrical installation condition report (eicr) jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring East Yorkshire Council before you book anything in. It's a free call and saves a world of grief later.