Electrical · Tyne and Wear

Cost of Electrical Installation Condition Report (EICR) in Newcastle upon Tyne (2026)

A typical electrical installation condition report (eicr) job in Newcastle upon Tyne costs £120 at the budget end and £285 for a full-spec install, per property. Outside peak season you'll usually get booked in within a week or two; summer runs tighter.

Typical cost in Newcastle upon Tyne -5%
Low £120
Typical £203
High £285
Typical price per property Last updated 22 April 2026
  • NICEIC Part P certified
  • NAPIT Building Regs notifications
  • TrustMark Government-endorsed
  • Part P 18th Edition compliant

About electrical installation condition report (eicr) in Newcastle upon Tyne

Newcastle upon Tyne is a large city of around 300,000 in Tyne and Wear. The housing is mostly red-brick Victorian terraces, stone-built millworker housing and post-war semi-detached estates typical of Northern industrial towns. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like NE1, NE2, NE3 tend to be quicker jobs with standardised fittings. Local trade prices sit in the same ballpark as the UK average, with Tyne and Wear firms quoting close to national rates.

Straight up, the North East is usually the cheapest region for trade work. Gas Safe engineers and electricians often quote 10 to 15 percent under the UK average. Newcastle, Durham and Middlesbrough are well served; rural Northumberland jobs tend to go to a regional firm rather than a one-van outfit.

Anything notifiable (new circuits, consumer unit swaps, bathroom zones, EV chargers) falls under Part P and has to go through an NICEIC, NAPIT or ECA registered electrician. Day rates run £200 in the regions up to about £400 in London. If your sparky can't give you a Building Control certificate at the end of a rewire or CU change, walk away.

Electrical Installation Condition Report (EICR) cost breakdown in Newcastle upon Tyne

Basic £120 – £165

1-bed flat, up to 6 circuits

Standard £165 – £220

3-bed house, 10 circuits

Complex £220 – £380

Commercial property or 4+ bed with annexes

What affects the price of electrical installation condition report (eicr) in Newcastle upon Tyne?

  • Number of circuits tested
  • Landlord vs homeowner report
  • Property size
  • Remedial work quoted separately

Newcastle upon Tyne vs the UK average

Newcastle upon Tyne sits in the electrical market at a cost multiplier of 0.95× the UK national average. That puts Newcastle upon Tyne electrical installation condition report (eicr) prices at £120–£285 versus the UK average of £125–£300 per property.

Newcastle upon Tyne vs UK national average — per property Newcastle upon Tyne £120 £285 UK average £125 £300
Typical price range, per property

Electrical Installation Condition Report (EICR) cost calculator — Newcastle upon Tyne

Estimated cost in Newcastle upon Tyne
£175 – £230
per property

Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.

Get 3 free quotes from local electrical installation condition report (eicr) specialists in Newcastle upon Tyne

Compare prices from vetted, trade-body-certified professionals near Newcastle upon Tyne (NE1, NE2, NE3). No obligation, takes about 2 minutes.

Get my free quotes
  • No obligation
  • Takes 2 minutes
  • Vetted tradespeople
  • Insurance-backed

What's typically included in a electrical installation condition report (eicr) quote

  • Visual and dead testing of each circuit
  • Live testing of RCDs
  • Coded report (C1/C2/C3/FI)
  • Remedial recommendations with timescales

Frequently asked questions

How much does electrical installation condition report (eicr) cost in Newcastle upon Tyne?

Budget £120 to £285 per property for electrical installation condition report (eicr) in Newcastle upon Tyne. Prices here are around 5% cheaper than the UK average. What moves a quote inside that range is mostly electrical contractor day rates in Tyne and Wear and the specific material list for your job.

How long does electrical installation condition report (eicr) take in Newcastle upon Tyne?

A straightforward electrical installation condition report (eicr) job in Newcastle upon Tyne runs to 2–4 hours. You can lose days to things outside the contractor's control — parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.

What's included in the price of electrical installation condition report (eicr) in Newcastle upon Tyne?

A proper electrical installation condition report (eicr) quote in Newcastle upon Tyne should cover: Visual and dead testing of each circuit; Live testing of RCDs; Coded report (C1/C2/C3/FI); Remedial recommendations with timescales. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.

Is electrical installation condition report (eicr) cheaper in Newcastle upon Tyne than the UK average?

Electrical Installation Condition Report (EICR) in Newcastle upon Tyne runs around 5% cheaper than the UK average. The UK-wide benchmark for this job is £125 to £300 per property; Newcastle upon Tyne quotes tend to land between £120 and £285. Handy to know what the average actually looks like before you price round.

Do I need planning permission for electrical installation condition report (eicr) in Newcastle upon Tyne?

Most electrical installation condition report (eicr) jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring Tyne and Wear Council before you book anything in. It's a free call and saves a world of grief later.