Heating & Boilers · Cheshire

Cost of Underfloor Heating Installation in Crewe (2026)

Crewe quotes for underfloor heating installation are landing between £70 and £185 per m² at the moment. Most jobs take 2–5 days for a typical room. The three things that move the price most around Cheshire are wet (water-based) vs electric dry systems; screed depth and floor build-up; floor finish (tile, engineered wood, lvt).

Typical cost in Crewe -8%
Low £70
Typical £128
High £185
Typical price per m² Last updated 22 April 2026
  • Gas Safe Registered engineers only
  • OFTEC For oil-fired appliances
  • MCS Heat-pump certification
  • HETAS Solid fuel & biomass

About underfloor heating installation in Crewe

Crewe is a medium town of around 74,000 in Cheshire. The housing is mostly red-brick Victorian terraces, stone-built millworker housing and post-war semi-detached estates typical of Northern industrial towns. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like CW1, CW2 tend to be quicker jobs with standardised fittings. Local trade prices sit below the UK average. Lower contractor overheads and shorter distances across Cheshire do most of the work.

The North West swings hard on location. Manchester, Chester and Trafford are around the UK average; Blackburn, Burnley and Cumbria are well under it. Liverpool has no shortage of firms. If the job's in a Lake District postcode (CA, LA) expect a travel surcharge past the A590.

Heating is a regulated trade. Gas Safe for anything gas, OFTEC for oil, HETAS for wood burners and stoves, MCS for heat pumps. The bulk of the price is the engineer's time, roughly £300 to £500 a day in 2025, plus the appliance. A summer quote on the same job is usually 10 to 15 percent less than a winter emergency one, so don't leave an ageing boiler until October.

Underfloor Heating Installation cost breakdown in Crewe

Basic £70 – £100

Electric dry mat system in a single bathroom under 5m²

Standard £100 – £145

Wet system in a kitchen/diner up to 30m² with one zone

Complex £145 – £230

Whole-ground-floor wet system with multi-zone manifold and screed

What affects the price of underfloor heating installation in Crewe?

  • Wet (water-based) vs electric dry systems
  • Screed depth and floor build-up
  • Floor finish (tile, engineered wood, LVT)
  • Number of zones and thermostats
  • Whether insulation boards are needed first
  • Connection to existing boiler or new manifold

Crewe vs the UK average

Crewe sits in the heating & boilers market at a cost multiplier of 0.92× the UK national average. That puts Crewe underfloor heating installation prices at £70–£185 versus the UK average of £75–£200 per m².

Crewe vs UK national average — per m² Crewe £70 £185 UK average £75 £200
Typical price range, per m²

Underfloor Heating Installation cost calculator — Crewe

Estimated cost in Crewe
£105 – £150
per m²

Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.

Get 3 free quotes from local underfloor heating installation specialists in Crewe

Compare prices from vetted, trade-body-certified professionals near Crewe (CW1, CW2). No obligation, takes about 2 minutes.

Get my free quotes
  • No obligation
  • Takes 2 minutes
  • Vetted tradespeople
  • Insurance-backed

What's typically included in a underfloor heating installation quote

  • Supply of pipework, manifold and controls
  • Insulation and screed where required
  • Pressure testing
  • Connection to the heating circuit
  • Commissioning and thermostat setup

Frequently asked questions

How much does underfloor heating installation cost in Crewe?

Budget £70 to £185 per m² for underfloor heating installation in Crewe. Prices here are around 8% cheaper than the UK average. What moves a quote inside that range is mostly heating contractor day rates in Cheshire and the specific material list for your job.

How long does underfloor heating installation take in Crewe?

A straightforward underfloor heating installation job in Crewe runs to 2–5 days for a typical room. You can lose days to things outside the contractor's control — parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.

What's included in the price of underfloor heating installation in Crewe?

A proper underfloor heating installation quote in Crewe should cover: Supply of pipework, manifold and controls; Insulation and screed where required; Pressure testing; Connection to the heating circuit; Commissioning and thermostat setup. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.

Is underfloor heating installation cheaper in Crewe than the UK average?

Underfloor Heating Installation in Crewe runs around 8% cheaper than the UK average. The UK-wide benchmark for this job is £75 to £200 per m²; Crewe quotes tend to land between £70 and £185. Handy to know what the average actually looks like before you price round.

Do I need planning permission for underfloor heating installation in Crewe?

Most underfloor heating installation jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring Cheshire Council before you book anything in. It's a free call and saves a world of grief later.