Heating & Boilers · Wiltshire

Cost of Underfloor Heating Installation in Swindon (2026)

Swindon quotes for underfloor heating installation are landing between £75 and £200 per m² at the moment. Most jobs take 2–5 days for a typical room. The three things that move the price most around Wiltshire are wet (water-based) vs electric dry systems; screed depth and floor build-up; floor finish (tile, engineered wood, lvt).

Typical cost in Swindon average
Low £75
Typical £138
High £200
Typical price per m² Last updated 22 April 2026
  • Gas Safe Registered engineers only
  • OFTEC For oil-fired appliances
  • MCS Heat-pump certification
  • HETAS Solid fuel & biomass

About underfloor heating installation in Swindon

Swindon is a large city of around 184,000 in Wiltshire. The housing is mostly period cottages, Edwardian villas and 1930s semi-detached housing alongside newer commuter developments. That matters: older properties usually mean more pipework, rewiring and retrofit surprises, while newer builds in districts like SN1, SN2, SN3 tend to be quicker jobs with standardised fittings. Local trade prices sit in the same ballpark as the UK average, with Wiltshire firms quoting close to national rates.

Bristol and Bath run hot. Step outside them and into Devon, Cornwall or rural Somerset and the supply thins out fast, especially for specialist trades like heat pumps or unvented cylinders. Lead times get longer the further west you go, and most firms will add travel if you're past the nearest big town.

Heating is a regulated trade. Gas Safe for anything gas, OFTEC for oil, HETAS for wood burners and stoves, MCS for heat pumps. The bulk of the price is the engineer's time, roughly £300 to £500 a day in 2025, plus the appliance. A summer quote on the same job is usually 10 to 15 percent less than a winter emergency one, so don't leave an ageing boiler until October.

Underfloor Heating Installation cost breakdown in Swindon

Basic £75 – £110

Electric dry mat system in a single bathroom under 5m²

Standard £110 – £160

Wet system in a kitchen/diner up to 30m² with one zone

Complex £160 – £250

Whole-ground-floor wet system with multi-zone manifold and screed

What affects the price of underfloor heating installation in Swindon?

  • Wet (water-based) vs electric dry systems
  • Screed depth and floor build-up
  • Floor finish (tile, engineered wood, LVT)
  • Number of zones and thermostats
  • Whether insulation boards are needed first
  • Connection to existing boiler or new manifold

Swindon vs the UK average

Swindon sits in the heating & boilers market at a cost multiplier of 1.00× the UK national average. That puts Swindon underfloor heating installation prices at £75–£200 versus the UK average of £75–£200 per m².

Swindon vs UK national average — per m² Swindon £75 £200 UK average £75 £200
Typical price range, per m²

Underfloor Heating Installation cost calculator — Swindon

Estimated cost in Swindon
£115 – £170
per m²

Estimate based on live 2025 UK trade pricing. Always get 3 written quotes before committing.

Get 3 free quotes from local underfloor heating installation specialists in Swindon

Compare prices from vetted, trade-body-certified professionals near Swindon (SN1, SN2, SN3). No obligation, takes about 2 minutes.

Get my free quotes
  • No obligation
  • Takes 2 minutes
  • Vetted tradespeople
  • Insurance-backed

What's typically included in a underfloor heating installation quote

  • Supply of pipework, manifold and controls
  • Insulation and screed where required
  • Pressure testing
  • Connection to the heating circuit
  • Commissioning and thermostat setup

Frequently asked questions

How much does underfloor heating installation cost in Swindon?

Budget £75 to £200 per m² for underfloor heating installation in Swindon. Prices here are in line with the UK average. What moves a quote inside that range is mostly heating contractor day rates in Wiltshire and the specific material list for your job.

How long does underfloor heating installation take in Swindon?

A straightforward underfloor heating installation job in Swindon runs to 2–5 days for a typical room. You can lose days to things outside the contractor's control — parts on backorder, awkward access, or a firm slotting your job around existing bookings. Ask for a start date and expected finish up front.

What's included in the price of underfloor heating installation in Swindon?

A proper underfloor heating installation quote in Swindon should cover: Supply of pipework, manifold and controls; Insulation and screed where required; Pressure testing; Connection to the heating circuit; Commissioning and thermostat setup. If any of those aren't itemised on your quote, push back and ask. A written guarantee with a clear warranty period is reasonable to expect on this kind of work.

Is underfloor heating installation cheaper in Swindon than the UK average?

Underfloor Heating Installation in Swindon runs in line with the UK average. The UK-wide benchmark for this job is £75 to £200 per m²; Swindon quotes tend to land between £75 and £200. Handy to know what the average actually looks like before you price round.

Do I need planning permission for underfloor heating installation in Swindon?

Most underfloor heating installation jobs don't need planning permission, but Building Regulations and any manufacturer or trade-body sign-off still apply. If the property sits in a conservation area or is listed, ring Wiltshire Council before you book anything in. It's a free call and saves a world of grief later.